Mounting And Demounting. General Precautions - John Bean EHP System III-E Manual Del Operador

18
- EN
5.0 Mounting and demounting. General
precautions
CAUTION:
BEFORE MOUNTING A TIRE ON A RIM ENSURE
THE FOLLOWING RULES ARE OBSERVED:
A- THE RIM MUST BE CLEAN AND IN GOOD
CONDITION: IF NECESSARY CLEAN AFTER
REMOVING ALL WHEEL-WEIGHTS INCLUDING
'TAPE WEIGHTS' INSIDE THE RIM.
B- THE TIRE MUST BE CLEAN AND DRY, WITH
NO DAMAGE TO THE BEAD AND THE CASING.
C- REPLACE THE RUBBER VALVE STEM WITH
A NEW ONE OR REPLACE THE 'O' RING IF THE
VALVE STEM IS MADE OF METAL.
D- IF THE TIRE REQUIRES A TUBE, MAKE SURE
THE TUBE IS DRY AND IN GOOD CONDITION.
E - L U B R I C AT I O N I S N E C E S S A R Y F O R
CORRECT MOUNTING OF THE TIRE AND
PROPER CENTERING. USE ONLY AN APPROVED
LUBRICANT FOR TIRES.
F- MAKE SURE THE TIRE IS THE CORRECT SIZE
FOR THE RIM.