Orbegozo VP 9500 Manual De Instrucciones página 15

VP 9500
- To stretch wool garments, adjust the temperature of wool and iron the garment inside out to
avoid the shiny effect.
Adjust the knob of the amount of steam:
- To iron a fabric with a certain thickness, increase the amount of steam by turning it clockwise.
- For iron at low temperature, adjust the knob to the minimum amount of steam
by turning it counterclockwise
For dry ironing:
- Do not press the steam button placed in front of the cork handle.
Filling the water tank
The water tank level is below the "MIN"
1. Remove the removable water tank and fill (maximum capacity 0.8 liters).
2. Make sure that the tank is repositioned correctly
3. Wait until the orange light comes on again on steam ready
Advise:
For fabrics that are not linen or cotton, hold the iron a few inches away so as not to burn the
tissue
Continuous steam function
Press the steam button with continuous steam locking option to get a continuous supply of
steam:
Warning:
Use the continuous steam with caution given that the output power of the steam can cause
burns.
Maintenance of the appliance
Before carrying out any maintenance, make sure the appliance is unplugged
and the soleplate of the iron and the iron rest support are cold.
• Do not use detergent or descaling agents to clean the soleplate of the iron
or the boiler
• Never put the iron or the boiler under the tap.
• Do not place the iron on a metal iron rest or besides surface as this may
damage (the iron rest is provided with non-slip feet and is designed to
withstand high temperatures).
Cleaning the plate of the iron
Cleaning the aluminum plate is highly recommended:
- Use a damp cloth or non-abrasive cleaner to remove any deposit on the plate or on the media
base.
- Never use sharp objects or rough to remove the deposit on the plate.
- Never use vinegar, abrasive cleaners or scouring to clean the iron.
-
Do not place the iron on a rough floor.
15