Product Overview; System Requirements; Package Contents; Software Installation (Windows) - Nilox DPW-210P Manual De Instrucciones

Thank you for purchasing Nilox Wireless N PCI Card that provides the easiest way to wireless networking. This document
describes how to install your Wireless Adapter and set up basic wireless connectivity on your Wireless Local Area
Network (WLAN). Please keep this manual for future reference.

PRODUCT OVERVIEW

 IEEE 802.11n compliant, to support up to 300Mbps speed (backward compatibility with 802.11b/g specifications)
 Windows
8/7/Vista/XP/2K and Linux operating systems
®
 Access Point Mode
 Strong network security with WEP and WPA/™WPA2™ support
 Easy to install and configure

SYSTEM REQUIREMENTS

Before installing the Adapter, your PC should meet the following:
 PC with available 32bit PCI slot
 Intel
Pentium III 600MHz or compatible processor with 512 MB RAM
® ®
 Windows
8/7/Vista/XP/2000 and Linux operating system
®
 Minimum 50MB free disk space for installing the driver and utilities
 CD-Rom drive (driver/utility Installation)

PACKAGE CONTENTS

Open Nilox Wireless N PCI Card box and carefully unpack it. The box should contain the following items:
 Wireless N PCI Card
 2 dBi Antenna (only for 16NX0501CQ001)
 2*2 dBi Antennas (only for 16NX050130001)
 Low Profile Bracket
 One MultiLanguage Quick Start Guide (English, Spanish and Italian)
 CD-Rom with Utility, Driver and Manual (English and Italian)
If any item is found missing or damaged, please contact your local reseller for replacement.
SOFTWARE INSTALLATION (W
This section will guide you through the Nilox Wireless N PCI Card driver and utility installation.
U D I
TILITY AND RIVER NSTALLATION
 Insert the CD-Rom, open the following CD-Rom directory path 16NX050130001\Driver\Windows
 Double click *.exe. The install wizard will begin installing the software
 Follow the Install Shield Wizard Instructions. Click Next to continue and finish it
Power the computer off and then plug the PCI Card into the PCI Slot (check the next section). It will be recognized and
auto installed. The installation program will help you to configure the Wireless LAN utility.
Windows 8/7/Vista/XP can manage the USB/PCI client with its embedded utility for wireless networks [please select Install
Driver Only (for 8/7/Vista) or Microsoft Zero Configuration Tool (for XP)].
U
NINSTALLATION
To uninstall the Nilox Wireless N PCI Card, go to your OS Control Panel.
 Open the Add/Remove Programs
 Select Ralink Wireless Lan Card in the Add/Remove Programs section and then click Remove
 Click on Remove ALL
 Then chose Yes, I want to restart my computer and click Finish
)
INDOWS
14
ENG