Product Overview; System Requirements; Package Contents; Software Installation - Nilox DPW-210X Manual De Instrucciones

Thank you for purchasing Nilox PCI Express Wireless N Card that provides the easiest way to wireless networking. This
document describes how to install your Wireless Adapter and set up basic wireless connectivity on your Wireless Local
Area Network (WLAN). Please keep this manual for future reference.

PRODUCT OVERVIEW

 IEEE 802.11n compliant, to support up to 150/300Mbps speed (backward compatibility with 802.11b/g) specifications)
 Windows
8/7/Vista/XP/2000 and Linux operating systems
®
 PCI Express technology allows higher speed between the adapter board and the host computer (over the common PCI
interface) and in addition has lower power requirements
 Strong network security with WEP and WPA/™WPA2™ support
 Easy to install and configure

SYSTEM REQUIREMENTS

Before installing the Adapter, your PC should meet the following:
 PC with available PCIe slot
 Intel
Pentium III 600MHz or compatible processor with 512 MB RAM
® ®
 Windows
8/7/Vista/XP/2000 and Linux operating system
®
 Minimum 50MB free disk space required for driver and utilities installation
 CD-Rom drive (driver/utility Installation)

PACKAGE CONTENTS

Open Nilox Wireless N PCI Express Card box and carefully unpack it. The box should contain the following items:
 Wireless N PCI Express Card
 2 dBi Antenna (only for 16NXPE01CQ001)
 2*2 dBi Antennas (only for 16NX050130001)
 Low Profile Bracket
 One MultiLanguage Quick Start Guide (English, Spanish and Italian)
 CD-Rom with Utility, Driver and Manual (English and Italian)
If any item is found missing or damaged, please contact your local reseller for replacement.

SOFTWARE INSTALLATION

This section will guide you through the Nilox Wireless N PCI Express Card driver and utility installation.
Windows 8 already includes the driver for this device. Please read directly the paragraph Hardware Installation and
Connect to a Network.
U D I
TILITY AND RIVER NSTALLATION
 Insert the CD-Rom, open the following CD-Rom directory path 16NXPE0130001\Driver, then open the correct
Windows OS version folder (Win7 or Win Vista-XP-2K)
 Double click Setup.exe. The install wizard will begin installing the software
 Follow the Install Shield Wizard Instructions. Click Next to continue and finish it
Power the computer off and then plug the PCIe Card into the PCI Express Slot (check the next section). It will be
recognized and auto installed. The installation program will help you to configure the Wireless LAN utility.
Optional (How do I know if my adapter is installed properly?)
Go to Start > My Computer > Properties then select the Hardware Tab. Click the + sign, next to Network
Adapters. Right-click on Realtek RTL8191(2)SE Wireless LAN 802.11n PCI-E NIC. Select Properties to check if
the drivers are installed properly. Look under Device Status to check if the device is working properly. Click OK to
continue.
14
ENG