Display; Apps; Storage & Microsd/Usb Drive Access - Yarvik Xenta 9.7 Manual De Instrucciones

Yarvik Tablet Manual
Here you can change the audio volume of the Tablet, otherwise possible via the volume buttons on the
Tablet itself and the volume buttons in the top status bar.
4.4

Display

Here you can change the brightness of the display, font sizes and the auto sleep time.
Please note that the higher the display brightness, the higher the energy consumption. This will drain your
battery substantially faster.
If you don't want the display to auto rotate as you tilt the Tablet, you can enable/disable this functionality in
the Auto-rotate screen setting.
4.5

Apps

Here you can manage applications that are installed on your Yarvik Tablet.
You can click apps that you have installed to see the app info and uninstall them if needed by using the
"Uninstall" button.
Please note that the preinstalled default applications (like e.g. the calculator) cannot be uninstalled.
4.6 Storage & MicroSD/USB Drive Access
Shows you the internal memory information. When a MicroSD card is present, you can also find the memory
information of the inserted card here.
Connecting your Yarvik Tablet to a PC or Mac by USB
You can connect your Yarvik Tablet to a PC or Mac using the provided USB cable.
When connected to a computer, you can access the Tablet's internal memory and, if present, an inserted
MicroSD card as standard USB Mass Storage Device.
Please refer to the printed Quick Start Guide of your Yarvik Tablet to determine the tablet's USB slave port.
Connect the USB cable to the USB slave port of your Yarvik Tablet and to a free USB port on your computer.
In the bottom right of your Tablet's screen, two messages will appear shortly after each other:
file:///Volumes/Product_Data/TAB09-211/Sent_artwork/Manual/internet/Yarvik/Manual/manual_en.html[07-03-13 16:28:47]
Return to index
Return to index
Return to index