Ryobi RY15702 Manual Del Operador página 10

TRI-ARC BLADE
®
The TRI-ARC blade is suited only for thicker weeds and
®
pulpy stalks. When the blade becomes dull, it can be turned
over to extend the life of the blade. Do not sharpen the TRI-
ARC blade.
®
Use only TRI-ARC blade, part number 06297, available at
®
your service center.
CUTTING TECHNIQUE - BLADE
WARNING:
Extreme care must be taken when using blades to ensure
safe operation. For safe operation when using the blade,
refer to Specific Safety Rules earlier in this manual.
 Always hold brush cutter on your right side with both
hands when operating. Use a firm grip on both handles.
 Maintain your grip and balance on both feet. Position
yourself so that you will not be drawn off balance by the
kickback reaction of the cutting blade.
OPERATION
 Inspect and clear the area of any hidden objects such as
glass, rocks, concrete, fencing, wire, wood, metal, etc.,
which can be thrown or entangled in the blade.
 Never use blades near sidewalks, fencing, posts, build-
ings or other immovable objects.
 Never use a blade after hitting a hard object without first
inspecting it for damage. Do not use if any damage is
detected.
 The unit is used for cutting from the right to the left in a
broad sweeping action from side to side.
 Use only the TRI-ARC
blade or cutting head to this brush cutter could result in
serious personal injury.
8 — English
blade. To install any other brand
®