Publicidad
Idiomas disponibles
Idiomas disponibles
[.,,."_o,,_
V_I Z IB]P'_"_
HOW TO REPLACE
THE AUGER
SHEAR
BOLT
The augers
are secured
to the auger
shaft with special
shear
bolts. These
shear
bolts are designed
to break
and
protect
the machine
if an object be-
comes
lodged
in the auger housing.
Do
not use a harder
bolt as the protection
provided
by the shear
bolt wil! be lost.
,_
WARNING: For safety and to
protect the machine, use
only original equipment
shear bolts,
To replace a broken shear bolt, proceed
as follows. Extra shear bolts were pro-
vided with the unit.
1. Stop the engine. Disengage all con-
trols.
2. Disconnect the spark plug wire.
Make sure all moving parts have
stopped.
3. Align the hole in the auger with the
hole in the auger shaft. Install the
new shear pin and spacer. See
Figure 45.
4. Connect the spark plug wire.
Shear Pin
/
i
Spacer
Figure 45
F 0410109L
32
Publicidad
