Cleaning And Care; Storage - Unold Go Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
6.
After use you can simply pull the concentrator nozzle off
of the appliance. However, to prevent burn injuries wait
until the appliance and the fit-on part have cooled before
pulling off the fit-on part.
7.
Always switch the appliance off using the switch before
disconnecting the plug from the wall socket.
Caution! The appliance is very hot during and after
operation!

CLEANING AND CARE

1.
Never immerse the appliance in water or other liquids in
order to clean it.
2.
Wipe off the appliance with a slightly damp cloth.
3.
Do not use sponges that can scratch, scouring agents,
steel wool, metal objects, disinfectants or hot cleaning
agents, as they can damage the appliance.
4.
If needed, you can clean the concentrator nozzle under
flowing water. In this case, allow the nozzle to dry com-
pletely before using the nozzle again.

STORAGE

1.
Do not wrap the power cord around the appliance to pre-
vent damage to the power cord.
2.
The appliance has a suspension eye via which you can
hang up the appliance.
3.
Protect the appliance from dust.
16
Copyright UNOLD AG | www.unold.de
Unplug the plug from the electrical outlet
Allow the appliance to cool.
Unplug the plug from the electrical outlet.
Allow the appliance to cool.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

87115

Tabla de contenido