LG LSM-F217M Manual Del Propietário página 9

Location and Operation of controls
10. POWER SWITCH
Press to turn the monitor ON. The POWER LAMP above the switch
will illuminate.
11. POWER LED LAMP
Power lamp indicates the power is on.
12. AC INLET
Use 100-240V AC, 50/60 Hz.
To prevent electrical shocks and fire hazards, do not use any other
power source.
13~16. VIDEO INPUT & OUTPUT CONNECTORS
These BNC connectors permit looping of a video signal in those
installations where it is desirable to display the video signal on more
than one monitor. A standard 1.0 Vp-p video signal applied to the
VIDEO INPUT will also appear at the VIDEO OUTPUT. Use coaxial
cables with BNC type plugs for these connections.
17. S-VIDEO JACK
If the camera or other video source outputs an S-VIDEO signal, con-
nect it directly to this jack.
18~23. AUDIO INPUT & OUTPUT CONNECTORS
Connect an RCA cable between these jacks and the audio output
jack of a camera or VCR.
9