Safety Recommendations - SKF TKTL 31 Instrucciones De Uso

WARNING LASER RADIATION
Max. Output: <1mW Wavelenght: 635-660nm
Complies with 21 CFR Chapter 1, subchapter J

Safety recommendations

• Always read and follow the operating instructions for use.
• Never stare directly into the laser source. Class II laser product.
• Never aim the laser beams into anyone's eyes.
• Never open the instrument.
• Never use the instrument under rain or very wet conditions
• Not for intrinsically safe area
• All repair work should be taken care of by an SKF repair shop.
• Here is a table of hazardous substance name and concentration
for TKTL 31:
Lead
Part
name
(Pb)
Laser
×
module
The table is prepared in accordance with the provisions of SJ/T11364.
•: Indicates that said hazardous substance contained in all of the
homogeneous materials for this part is below the limit requirement
of GB/T 26572.
× : Indicates that said hazardous substance contained in at least one of
the homogeneous materials used for this part is above the limit
requirement of GB/T 26572.
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
CAUTION
AVOID EXPOSURE LASER RADIATION
IS EMITTED FROM THIS APERTURE
Hazardous Substances
Mercury Cadmium
(Hg) (Cd)
• •
Hexavalent Polybrominated
Chromium biphenyls
(Cr(VI)) (PBB)
• •
Polybrominated
diphenyl
ethers
(PBDE)
•
EN EN 3