Lenze L-force E94AZRS0044 Instrucciones Para El Montaje página 43

Installation steps
How to proceed for standard mounting:
1. Prepare M5 threaded holes on the mounting plate, for instance according to the
mounting grid.
– Always use all mounting points specified.
2. Tightly screw together filter and mounting base.
E94AZxS0044
E94AZxS0104
E94AZxS0294
3. Under limited space conditions, filter and mounting base can be connected
electrically. (^ 47)
4. Screw the filter onto the mounting plate.
– Use M5 screw and washer assemblies or M5 hexagon socket screws with washers.
– If further devices are to be mounted directly adjacent on the right−hand side of the
filter, do not tighten the screws fully before all devices are mounted and aligned.
– Tightening torque: 3.4 Nm (30 lb−in).
EDK94AZRS DE/EN/FR/ES/IT 6.1
5 mm
Screws
2 x M5x20
2 x M5x25
l
Mechanical installation
Standard mounting
Tightening torque
3.4 Nm (30 lb−in)
5
SSP94NF004
43