Swingline EX10-05 Manual De Instrucciones página 5

Correct operating procedure
➊ Insert plug (D) into the AC power socket.
Slide the switch (F) to the AUTO position (
➋
➌ When not in use, slide the switch to the
Empty the waste basket regularly to ensure the shredder exit does
➍
not become blocked with paper.
Shredder Control Panel
Auto Off
Safety First
This means you should be careful because long hair can become
entangled in the cutting head.
This means don't reach into the feed opening of the cutting
head.
This means be careful of ties and other loose clothing which
could become entangled in the cutting head.
This means keep children away from shredder.
This means be careful of loose jewelry which could become
entangeld in the cutting head.
This means no aerosols.
This means machine is cooling down.
)
(off position).
Forward Reverse
Troubleshooting
If the paper shredder will not start, please check the following:
Is the machine plugged in correctly?
➊
➋ Is the switch pushed to the 'ON/AUTO' position?
Is the machine jammed with paper?
➌
➍ Has the motor overheated?
Is the shredder head located correctly on the bin
➎
In case of jammed paper, please follow the procedure below:
Check if the bin is too full with paper - the bin should be emptied
➊
regularly to avoid paper becoming jammed in the cutters.
Slide the switch to reverse (
➋
paper.
➌ If the paper is so jammed that it will not come out in reverse
function, slowly push the switch between reverse (
AUTO. Don't do this too quickly as this can damage the shredder.
WARNING – Do not under any circumstances use any metal objects
➍
(scissors, letter openers etc.) in an attempt to clear the entry – this
model has main voltage inside the casing, which could cause
serious injury.
Lubrication of the shredder
Only use Swingline Oil (1760049) to lubricate. ACCO Brands accepts no
liability for product performance or safety when other types or brands of
lubricants are used on any part(s) of this machine.
Emptying the waste basket
Empty the shredder bin regularly. Over filling the bin will cause the
shredder to stop operating.
➊ Unplug the product and lift away the head.
Empty the shredder bin.
➋
➌ Locate the shredder onto the bin.
•
CAUTION:
• Never insert fingers into the entry slot of the
shredder.
• Turn the power off immediately if your hair, tie or
sleeve becomes entangled in the shredder.
• Empty the shredder bin when it is full otherwise the
shredder's performance will be adversely affected.
Operating the shredder with a full shredder bin can
result in paper jamming in the cutters, which will
increase the machine's noise level.
) position to reverse the jammed
) and ON/
5