Troubleshooting - DieHard 28.71522 Manual Del Usuario

10. TROUBLESHOOTING

PROBLEM
LED does not light,
or inverter does not
function.
11. SPECIFICATIONS
Maximum continuous power ................................................................. 140 Watts
Surge capability (peak power) .............................................................. 280 Watts
No load current draw ...................................................................................<0.3A
Waveform ............................................................................. Modified Sine Wave
Input voltage ............................................................................... 10.5V-15.5V DC
Output voltage ...............................................................................110V-125V AC
Low battery shutdown ................................................................... 9.9V-10.8V DC
High battery shutdown ................................................................ 15.0V-16.0V DC
Optimum efficiency ......................................................................................>85%
AC outlet ............................................................................One, NEMA 5-15 USA
USB port ......................................................................................... One, 5V, 0.5A
Fuse ..................................................................................... One, 15 Amp (250V)
Dimensions ...................................................................... 5.5˝ L x 2.5˝ W x 1.5˝ D
Weight .............................................................................. approximately 0.45 lbs.
REASON
Poor contact at terminals.
Fuse is blown.
Inverter shutdown.
• 8 •
SOLUTION
Unplug and reinsert the 12 volt
plug or check connections at
power supply.
See If the Inverter Fuse Blows
section.
See LED Indicator and Shutdown
Protection section.