CARE AND CLEANING
CLEANING THE PASTA ROLLER AND CUTTERS
These accessories are designed to be used with pasta dough only. To avoid damaging
your Pasta Roller and Cutters, do not insert anything other than pasta dough.
IMPORTANT: Do not use metal objects to clean out the Pasta Roller and Cutters. Do not
wash the Pasta Roller and Cutters in the dishwasher, or immerse in water or other liquids.
The Pasta Roller and Cutters should be hand washed.
1
Turn Stand Mixer off and unplug.
After cutting pasta, let Pasta Roller
and Cutters air dry for one hour, then
remove any dried dough using the
3
Cleaning brush. If dried dough is
difficult to remove, try tapping the
attachment with your hand. Use a
toothpick if necessary.
NOTE: Never use a knife or any other
sharp object to remove excess dough.
Do not run a dish towel or any other
cloth through the rollers to clean them.
FOR DETAILED INFORMATION ON CLEANING THE PASTA ROLLER AND CUTTERS:
Visit kitchenaid.com/quickstart for additional Instructions with videos, inspiring recipes,
and tips on how to use your Pasta Roller and Cutters.
10 | CARE AND CLEANING
W10818898B_ENv03.indd 10
Completely disassemble Pasta Roller
and Cutters. Use the directions from
2
the "Disassembling the Pasta Roller
and Cutters" section.
After cleaning out all remaining
dried dough, polish the Pasta Roller
and Cutters with a soft, dry cloth
4
and store in a dry place at room
temperature. Do not wash the Pasta
Roller and Cutters in the dishwasher.
2/24/16 10:03 AM