The message [Panel refresh did not
finish...] is displayed.
When i) the TV is turned on, ii) the AC
power cord is unplugged, or iii) the room
temperature falls outside of the range
between 50 ºF and 104 ºF (10 ºC and 40 ºC)
during the Panel refresh, the Panel refresh
is not completed. Please avoid the above
three conditions during the Panel refresh.
For more information on
troubleshooting, refer to
the Help Guide.
Specifications
System
Television system
NTSC: American TV Standard
ATSC (8VSB Terrestrial): ATSC compliant
8VSB
QAM on cable: ANSI/SCTE 07 2000 (Does
not include CableCARD functionality)
Channel coverage
Analog terrestrial: 2 – 69 / Digital
terrestrial: 2 – 69
Analog Cable: 1 – 135 / Digital Cable: 1 –
135
Panel system: OLED (Organic Light Emitting
Diode) Panel
Speaker output: 10 W + 10 W + 5 W + 5 W
Wireless technology
Protocol IEEE 802.11a/b/g/n/ac
Bluetooth® Version 4.2
Input/Output jacks
CABLE/ANTENNA
75 ohm external terminal for RF inputs
/ VIDEO IN
Video/Audio input (mini jack)
HDMI IN 1/2/3/4 (support 4K resolution,
HDCP 2.3-compatible)
Video:
4096 × 2160p (60 Hz)*
1
(24 Hz)*
, 3840 × 2160p (60 Hz)*
2160p (24, 30 Hz), 1080p (30, 60,
120 Hz), 1080/24p, 1080i (60 Hz), 720p
(30, 60 Hz), 720/24p, 480p, PC
3
Formats*
12
US
1
2
*
, 4096 × 2160p
2
, 3840 ×
Audio:
In eARC (Enhanced Audio Return
Channel) mode
Refer to the Help Guide for details.
Except eARC mode
5.1 channel linear PCM: 32/44.1/48/
88.2/96/176.4/192 kHz 16/20/24 bits,
Dolby Audio, Dolby Atmos, DTS
eARC/ARC (Enhanced Audio Return
Channel/Audio Return Channel) (HDMI IN 3
4
only)*
In eARC mode
Refer to the Help Guide for details.
In ARC mode
Two channel linear PCM: 48 kHz 16 bits,
Dolby Audio, Dolby Atmos, DTS
DIGITAL AUDIO OUT (OPTICAL)
Digital optical jack (Two channel linear
PCM: 48 kHz 16 bits, Dolby Audio, DTS)
(Stereo mini jack)
Headphone
1,
2,
USB port 1 and 2 support High Speed USB
(USB 2.0)
USB port 3 supports Super Speed USB
(USB 3.1 Gen 1)
LAN
10BASE-T/100BASE-TX connector
(Depending on the operating
environment of the network, connection
speed may differ. The communication
rate and quality are not guaranteed.)
Refer to the Help Guide for supported
files and formats in Home Network.
REMOTE
RS-232C mini jack, IR IN mini jack
These jacks are for receiving the external
control signal.
Power and others
Power requirements
110 V – 240 V AC, 50/60 Hz (U.S.A./
Canada 120 V AC, 60 Hz)
Power consumption
In use
XBR-65A8H / XBR-65A8CH: 457 W
XBR-55A8H / XBR-55A8CH: 341 W
5
6
In standby*
*
Less than 0.5 W with 120 V AC and less
than 0.5 W with 240 V AC
Screen size (measured diagonally) (Approx.)
XBR-65A8H / XBR-65A8CH: 163.9 cm /
64.5 inches (65" class)
XBR-55A8H / XBR-55A8CH: 138.8 cm /
54.6 inches (55" class)
3