Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

FM/AM
Compact Disc Player
Operating Instructions
Manual de instrucciones
Owner's Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. CDX-GT40W Serial No.
To cancel the demonstration (DEMO) display, see page 9.
Para cancelar la pantalla de demostración (DEMO), consulte la página 11.
CDX-GT40W
© 2005 Sony Corporation
2-653-154-31 (1)
US
ES

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Resumen de contenidos para Sony CDX-GT40W

  • Página 1 The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. CDX-GT40W Serial No.
  • Página 2 Welcome ! Warning This equipment has been tested and found to Thank you for purchasing this Sony Compact comply with the limits for a Class B digital Disc Player. You can enjoy your drive with the following functions. device, pursuant to Part 15 of the FCC Rules.
  • Página 3: Tabla De Contenido

    Receiving the stored stations ... . 8 Tuning automatically ....8 Manufactured under license SonicStage and its logo are trademarks of Sony from BBE Sound, Inc. Corporation.
  • Página 4: Getting Started

    Getting Started Detaching the front panel Resetting the unit You can detach the front panel of this unit to prevent theft. Before operating the unit for the first time, or Caution alarm after replacing the car battery or changing the If you turn the ignition switch to the OFF connections, you must reset the unit.
  • Página 5: Attaching The Front Panel

    Inserting the disc in the unit Attaching the front panel Place the hole A of the front panel onto the Press (OPEN). spindle B on the unit, then lightly push the left side in. Insert the disc (label side up). Press (SOURCE) on the unit (or insert a disc) to operate the unit.
  • Página 6: Location Of Controls And Basic Operations

    Location of controls and basic operations Main unit CDX-GT40W Front panel removed RESET Card remote commander Refer to the pages listed for details. The corresponding buttons on the card remote RM-X151 commander control the same functions as those on the unit.
  • Página 7 H GP* T Disc slot 5 /ALBM* +/– buttons* To skip groups/albums (press); skip groups/ To insert the disc. albums continuously (press and hold). The following buttons on the card remote I SEEK –/+ buttons commander have also different buttons/functions from the unit.
  • Página 8: Display Items

    Radio For details on selecting a CD/MD changer, see Storing and receiving stations page 10. Caution Display items When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically — BTM Press (SOURCE) repeatedly until “TUNER”...
  • Página 9: Other Functions

    Other functions Other equalizer types are also adjustable. With the card remote commander Changing the sound settings In step 3, to adjust the selected item, press <, M, , or m. Adjusting the sound Adjusting setup items — SET characteristics — BAL/FAD/SUB You can adjust the balance, fader, and subwoofer Press and hold the select button.
  • Página 10: Using Optional Equipment

    Adjusting the volume level A.SCRL (Auto Scroll) To scroll long displayed item automatically Be sure to adjust the volume for each connected when the disc/album/group/track is changed. audio device before playback. – “A.SCRL-ON”: to scroll. 1 Turn down the volume on the unit. –...
  • Página 11: Rotary Commander Rm-X4S

    Repeat and shuffle play • PRESET/DISC control The same as (GP/ALBM) +/– on the unit (push 1 During playback, press (3) (REP) or (4) in and rotate). (SHUF) repeatedly until the desired setting • VOL (volume) control appears. The same as the volume control dial on the unit (rotate).
  • Página 12: Additional Information

    • Before playing, clean the discs Additional Information with a commercially available cleaning cloth. Wipe each disc Precautions from the center out. Do not use solvents such as benzine, thinner, commercially available • If your car has been parked in direct sunlight, cleaners, or antistatic spray allow the unit to cool off before operating it.
  • Página 13: About Atrac Cd

    “.mp3”/“.wma” to the file name. your unit that are not covered in this manual, consult • During playback of a VBR (variable bit rate) MP3/ your nearest Sony dealer. WMA file or fast-forward/reverse, elapsed playing time may not display accurately.
  • Página 14: Removing The Unit

    If the fuse blows again after replacement, there may be an internal malfunction. In such a case, Fuse (10A) consult your nearest Sony Remove the unit. dealer. 1 Insert both release keys simultaneously Cleaning the connectors until they click.
  • Página 15: Troubleshooting

    Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono) This unit cannot be connected to a digital preamplifier Harmonic distortion at 1 kHz: 0.5 % (stereo), or an equalizer which is Sony BUS system compatible. 0.3 % (mono) Design and specifications are subject to change Separation: 35 dB at 1 kHz without notice.
  • Página 16 The contents of the memory have been erased. “MS” or “MD” does not appear on the source display when both the optional MGS-X1 and • The RESET button has been pressed. t Store again into the memory. MD changer are connected. •...
  • Página 17: Error Displays/Messages

    The changer is loading the disc. If these solutions do not help improve the situation, t Wait until loading is complete. consult your nearest Sony dealer. L. SEEK +/– If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at the The local seek mode is on during automatic tuning.
  • Página 18 – Puede almacenar hasta 6 emisoras de radio sintonizador de radio por satélite, póngase en por banda (FM1, FM2, FM3, AM1 y AM2). contacto con el distribuidor Sony autorizado – BTM (Memoria de la mejor sintonía): la más cercano. unidad selecciona las emisoras que emiten la “SAT Radio”, “SAT Radio Ready”, los...
  • Página 19 Tabla de contenido Procedimientos iniciales Otras funciones Restauración de la unidad ....4 Cambio de los ajustes de sonido ... 10 Ajuste del reloj .
  • Página 20: Procedimientos Iniciales

    Procedimientos iniciales Extracción del panel frontal Restauración de la unidad Puede extraer el panel frontal de la unidad para evitar que la roben. Antes de utilizar la unidad por primera vez, o Alarma de precaución después de sustituir la batería del automóvil o de Si gira el interruptor de encendido hasta la cambiar las conexiones, debe restaurarla.
  • Página 21: Colocación Del Panel Frontal

    Inserción del disco en la unidad Colocación del panel frontal Coloque el orificio A del panel frontal en el eje Presione (OPEN). B de la unidad y, a continuación, presione ligeramente el lado izquierdo hacia adentro. Inserte el disco (con la etiqueta Presione (SOURCE) en la unidad (o inserte un orientada hacia arriba).
  • Página 22: Ubicación De Los Controles Y Operaciones Básicas

    Ubicación de los controles y operaciones básicas Unidad principal CDX-GT40W Panel frontal extraído RESET Control remoto de tarjeta Consulte las páginas indicadas para obtener información detallada. Los botones RM-X151 correspondientes en el control remoto de tarjeta controlan las mismas funciones que los de la unidad.
  • Página 23 H Botones GP* Q Toma de entrada AUX 11 /ALBM* +/–* Para omitir grupos/álbumes (presionar); para Para conectar un dispositivo de audio omitir grupos/álbumes en forma continua portátil. (mantener presionado). R Botón RESET 4 I Botones SEEK –/+ S Botón Z (expulsar) 5 Para expulsar el disco.
  • Página 24: Elementos De La Pantalla

    Reproducción repetida y aleatoria Durante la reproducción, presione Si desea obtener información adicional sobre (3) (REP) o (4) (SHUF) varias veces cómo seleccionar un cambiador de CD/MD, hasta que aparezca el ajuste deseado. consulte la página 11. Seleccione Para reproducir Elementos de la pantalla REP-TRACK pistas en forma repetida.
  • Página 25: Radio

    Radio Recepción de las emisoras almacenadas Almacenamiento y recepción Seleccione la banda y, a continuación, de emisoras presione un botón numérico (del (1) al (6)). Precaución Para sintonizar emisoras mientras maneja, utilice Sintonización automática la función Memoria de la mejor sintonía (BTM) para evitar accidentes.
  • Página 26: Otras Funciones

    Para restaurar la curva de ecualizador Otras funciones ajustada en fábrica, mantenga presionado el botón de selección antes de que finalice el Cambio de los ajustes de ajuste. Después de 3 segundos, se completa el ajuste sonido y la pantalla vuelve al modo de recepción/ reproducción normal.
  • Página 27: Uso De Un Equipo Opcional

    3 Conecte el dispositivo a la unidad. CONTRAST Para ajustar el contraste de la pantalla. El nivel de contraste puede ajustarse en 7 pasos. M.DSPL (Desplazamiento de indicaciones) Para seleccionar el modo de desplazamiento de indicaciones. – “M.DSPL-SA” ( ): para mostrar patrones en movimiento y el analizador de espectro.
  • Página 28: Mando Rotatorio Rm-X4S

    Omisión de álbumes y discos Ubicación de los controles Los botones correspondientes en el mando 1 Durante la reproducción, presione rotatorio controlan las mismas funciones que los (GP/ALBM) +/–. de esta unidad. Presione (GP/ALBM) Para omitir álbumes y suéltelo (manténgalo presionado durante un PRESET/ DISC...
  • Página 29: Información Complementaria

    • Antes de reproducir discos, Información complementaria límpielos con un paño de limpieza disponible en el Precauciones mercado. Hágalo desde el centro hacia los bordes. No utilice disolventes como • Si estaciona el automóvil bajo la luz directa del bencina, diluyentes, productos sol, deje que la unidad se enfríe antes de usarla.
  • Página 30: Acerca De Los Cd De Atrac

    • Durante la reproducción de un archivo MP3/WMA manual, póngase en contacto con el distribuidor de VBR (velocidad de bits variable), o al avanzar o Sony más cercano. retroceder rápidamente, es posible que el tiempo de reproducción transcurrido no se muestre con precisión.
  • Página 31: Extracción De La Unidad

    Fusible (10 A) de funcionamiento interno. En Extraiga la unidad. tal caso, consulte con el distribuidor Sony más cercano. 1 Inserte las dos llaves de liberación simultáneamente hasta escuchar un clic. Limpieza de los conectores Es posible que la unidad no funcione correctamente El gancho debe si los conectores entre ésta y el panel frontal están...
  • Página 32: Especificaciones

    Frecuencia intermedia: 10,7 MHz/450 kHz preamplificador digital ni a un ecualizador que sea Sensibilidad: 30 µV compatible con el sistema BUS de Sony. El diseño y las especificaciones están sujetos a Sección del amplificador de potencia cambios sin previo aviso.
  • Página 33 No se puede reproducir el CD de ATRAC. t Lleve a cabo la reproducción con un cambiador • El disco no se creó con software autorizado como de CD de Sony compatible con MP3 o con esta SonicStage o SonicStage Simple Burner. unidad.
  • Página 34: Mensajes/Indicaciones De Error

    El modo de búsqueda local está activado durante la Si estas soluciones no ayudan a mejorar la situación, sintonización automática. póngase en contacto con el distribuidor Sony más NO DISC cercano. El disco no está insertado en el cambiador de CD/MD.
  • Página 36 If you have any questions/problems regarding this product, try the following: Read Troubleshooting in these Operating Instructions. Reset the unit. Note: Stored data may be erased. Please contact (U.S.A. only); 1-800-222-7669 Call http://www.SONY.com Sony Corporation Printed in Thailand...

Tabla de contenido