Personal Safety; Moving The Compressor - Industrial Air Contractor C042I Manual Del Operador Y Piezas

Safety Information (continued)

PERSONAL SAFETY

□
Keep proper footing and balance at all times.
Proper footing and balance enables better control
of the tool in unexpected situations
□
Do not use on a ladder or unstable support.
WARNING: Operating any power tool can result in foreign
objects being thrown into your eyes, which can result in
severe eye damage. Before beginning operation, always
wear safety goggles, safety glasses with side shields, or
a full face shield when needed. Always use eye protection
marked to comply with ANSI Z87.1.
WARNING: This product contains chemicals known to
the State of California to cause cancer and birth defects or
other reproductive harm. Wash hands after handling.
WARNING: Use safety equipment. Always wear eye
protection with side shields when operating power tools.
A dusk mask, non-skid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
MOVING THE AIR COMPRESSOR
□
Grasp the handle.
□
When the location is reached, slowly lower the
compressor to the ground. Always store the
compressor in a horizontal position resting on the
rubber bumpers.
□
When transporting the compressor in a vehicle,
trailer, etc., make sure the tank is drained and the
unit is secured with straps to prevent tipping. Use
care when driving to prevent tipping the unit over in
the vehicle. Damage can occur to the compressor
or surrounding items if the compressor is tipped.
Do not lift by the shroud.
WARNING: Stay alert when operating a power tool. Do
not use the tool while tired or under the influence of drugs,
alcohol, or medication.
WARNING: Do not wear loose clothing or jewelry.
Contain long hair. Keep your hair, clothing, and gloves away
from moving parts. Loose clothes, jewelry, or long hair can
be caught in moving parts.
WARNING: Never touch any exposed metal parts on
compressor during or immediately after operation. The
compressor will remain hot for several minutes after
operation. Do not reach around protective shrouds or
attempt maintenance until the unit has been allowed to
cool.
WARNING: Risk of unsafe operation. Ensure proper
footing and use caution when carrying the compressor so
that the unit does not cause loss of balance.
3
Please contact 1-888-895-4549 for further assistance.
industrialaircontractor.com