Loading Your Washer; Getting Started - Samsung WA48H7400A Serie Manual De Usuario

operating instructions
warning: To reduce the risk of fire, electric shock, or injury to persons when using your appliance,
follow basic precautions, including the following:
WArninG

loAdinG your WAsHer

• You can fill the tub with dry, unfolded clothes, but DO
NOT OVERLOAD the tub any more than ¾ full.
• Overloading may reduce washing efficiency, cause
excess wear, and possibly cause creasing or wrinkling
of the load.
• Wash delicate items such as bras, hosiery, and other
lingerie in the Delicates cycle with similar lightweight
items.
• When washing big bulky items or a few smaller items
that don't fill the tub completely – a rug, a pillow, stuffed toys, or one or two sweaters, for example –
add a few towels to improve spin performance.
• Do not insert bulky items except for Bedding in this cycle.
During the spin cycle, the washer may add additional water to redistribute the clothes and correct an
imbalance inside the drum.
• When washing heavily soiled loads, do not overload your washer to ensure good cleaning results.
• To add a forgotten item:
1. Press the start/pause button to pause the washer.
2. Wait for the door to unlock automatically, and then open the door.
3. Add the item, close the door, and then press the start/pause button. The cycle will resume.

GettinG stArted

1. Load your washer.
2. Add liquid (or powder) detergent and additives to the dispenser (see pages 24~26).
3. Select the appropriate cycle and options for the load (see pages 18~23).
4. Close the lid.
5. Press the start/pause button.
6. The Wash Indicator light illuminates.
7. The estimated cycle time will appear in the display.
The time may fluctuate to indicate the time remaining in the cycle better.
The actual time required for a cycle may differ from the estimated time in the display depending on the
water pressure, water temperature, detergent, and laundry.
8. Before your washer starts to fill, it will make a series of clicking noises to check the door lock and do a
quick drain.
• When the cycle is complete, the Door Lock light will go out and "End" (WA48H7400A*,
WA45H7200A*) / "0" (WA45H7000A*) will appear in the display.
• Pressing the power button cancels the cycle and stops your washer.
• The Wash, Rinse , and Spin indicator lights will illuminate during those portions of the cycle.
WA7000HA WASH_WA48H_USER MANUAL_DC68-03133P-05_EN.indd 17
English - 17
2015/4/15 16:35:34