Power Supply; Outdoor Station; Options; Technical Assistance - Guarantee - Extel Entry Instrucciones De Uso

b. Power supply
• Reference: 830216
• Adapter: 100-240 V∼, 50/60Hz ; 17 V , 1.5A
If the power supply cable is modified, make sure that polarity is respected (fig. 7)).
c. Outside station
• Reference: 820301
• C-MOS colour camera: 420 TVL
• Viewing angle: H102° V75°
• Operating temperature: from -10°C to + 45°C
• Sensitivity: 3 Lux
• Protection index: IP44
• Size with shield (mm): 180 x 72 x 47
• Latch control: 12 V - 1 A maximum
• Gate control: cut-off power 12 V - 2 A

8. OPTIONS

• All Extel electric catches
• All Extel electric locks
• All Extel mechanisms
• MODULO modular power supply (wiring fig. 7)

9. TECHNICAL ASSISTANCE - GUARANTEE

Problems
• The monitor doesn't
light up
• Bad image and/or bad
sound
• Image too bright
• Black screen, no
chime
• No sound coming from
the outdoor station
The latest version of the instructions in colour is downloadable from:
GB5
(PL ENTRY)
Possible Causes
• No power is reaching the moni-
tor
• Protection triggered
• Environment
• Installation or interference
• Position of the video camera
• Installation
• Insects
If required, our technical site is at your disposal: www.cfi-extel.com
CFI EXTEL ENTRY - 11/2016
Remedies
• Check the power supply connection
• Check the wiring for the outside station
and disconnect the power supply for 10 secs
• Check that the wires used are the correct size
and that the connection wires of the videophone
are not in the same sheath as the 230V.
• We recommend that you check that your
equipment is working properly by carrying out a
short-distance test
• Do not point the video camera directly at the
sun or at reflecting surfaces.
• The wires connecting the monitor and the
street unit (1 and 2) have been swapped
• Check that the hole of the microphone of the
outdoor station is not blocked
www.cfi-extel.com