Before Installation - Klarstein LAUSANNE Manual De Instrucciones

EN
18

BEFORE INSTALLATION

• This device is designed to be mounted on a wall at a height of at least 300 mm. The
minimum distance from the top of the heater to the ceiling should be at least 1000
mm. The wall bracket must be mounted horizontally and the cable must be routed
along the bottom right of the heater.
• For an optimum view of the control panel, we recommend a distance of 600 mm
from the underside of the heater to the floor. The exact dimensions are as follows:
• The mounting bracket is attached to the rear of the heater. Loosen the 2 screws and
remove the bracket before installation.