Installation - Klarstein LAUSANNE Manual De Instrucciones

INSTALLATION

Choose a wall on which you want to hang your electric heater. Draw a horizontal
line with a spirit level and mark 5 drill holes 141.0 mm apart for the fixing screws. The
holes are intended for mounting the fireplace and must be level so that the fireplace
can be properly mounted and levelled.
Drill 4 holes with a diameter of 8 mm (0.3 in) and a depth of 26 mm (1.02 in) at the
markings. Insert the supplied dowels and carefully hammer them into the wall until the
end is flush with the wall surface.
1
2
EN
19