globalindustrial.ca
Instruction Manual
Customer Service
US: 1-800-645-2986
IMPORTANT SAFETY INFORMATION
DANGER:
• Do not submerge motor or expose motor to water.
• Never handle the fan or motor with wet hands or when
standing on wet or damp surface or in water.
WARNING:
• Electric shock hazards - May cause severe personal injury
or death. For your safety, turn off electric power supply before
installing. Unplug unit before moving or servicing your fan.
Never make adjustments to the fan when power is on.
• Do not remove the power supply cord, ground prong or
ground fault unit. Do not alter power cord. For your personal
safety, the fan must be grounded. Removal or tampering of
power cord will void warranty. Never use an extension cord
to connect the fan to an outlet. All installations must be made
into a grounded outlet. Unplug the fan when not in use.
• To reduce the risk of fire or electrical shock, do not use this
fan with any solid state speed control device. This plug is
intended to fit an outlet only one way. If this does not fit outlet,
contact a qualified electrician. Do not attempt to bypass this
procedure.
• If the power supply cord is damaged, contact a qualified
electrician to install an appropriate replacement cord to
prevent any injury or damage.
CAUTION:
• Read and follow all instructions before operating fan. Do not
use fan if any part is damaged.
• Appliance should not be used in locations where corrosive or
explosive atmosphere (dust, vapor or gas) exists.
• Never insert fingers or objects through the grill guard when
fan is in operation. Disconnect the fan when removing guard
for cleaning.
• Make sure the fan is on a stable, flat surface when in operation.
• Do not use fan in windows. Rain may create an electrical hazard.
Manual de Instrucciones
Servicio de atención al Cliente
México: 01.800.681.6940
Portable Ventilator Fan
Models 246340 246343 292605
:
Size" Model
8
2
16
Distribucion Industrial Globales S DE RL DE CF
MAINTENANCE AND STORAGE
• To keep the fan clean, use a dry cloth to wipe the surface
of the fan.
• Do not clean the fan with a chemical solution as this may
damage the coating and plastic parts.
• Never clean the fan in water.
• Fan should always be stored indoors.
FEATURES:
• Large capacity E-class motor.
• Specially designed axial propellers.
• High static pressure.
• High flow rate.
• Excellent strength.
Blade
Dia. Voltage Frequency Phase Poles Watts Speed Speed RPM Pressure
(mm)
(V~)
(Hz)
246340 200
120
60
246343 300
120
60
292605 400
120
60
1
Manuel d'instruction
Service à la clientèle
Canada: 888-645-2986
Low
High
(W)
CFM
CFM
1
2P
165
485
570
3300
1
2P
430
1394
1640 3300
1
2P
720
2422
2850 3250
Static
480
520
450
112519