Glacier bay TB24-JAV Guía De Uso Y Cuidado

TOOLS REQUIRED
Claw hammer
Measuring tape
Installation
1
DETERMINING THE MOUNTING LOCATION
NOTE: Before installing, make sure all parts are
present. Compare parts with the Hardware Included
list. If any part is missing or damaged, do not attempt
to install the product.
□ Determine the desired mounting location, and
mark the wall where the unit will be installed.
3
INSTALLING THE CABINET
□ For wall stud installation, insert #12 x 3 in. screws with
washers into the stud locations (not included).
□ For drywall installation, drill holes at the appropriate
locations and insert toggle bolts with washers (not
included).
□ For concrete wall installation, drill 1/4 in. holes at the
appropriate locations and insert #12 wall anchors,
followed by #12 x 3 in. screws (not included).
Safety goggles Phillips screwdriver
Wall hardware
Use and Care Guide
Tri-view Medicine Cabinet
Power drill
Level
2
PRE-DRILLING THE BACK OF THE CABINET
□ Drill 1/8 in. diameter holes through the back
panel of the cabinet
4
INSTALLING THE SHELVES
□ Insert the shelf clips (AA) into the holes on the inside
of the cabinet.
□ Rest the shelf (BB) on the shelf clips (AA).
Item #1000 004 897
Item #1000 004 900
Item #1000 004 904
Model #TB24-JAV
Model #TB30-JAV
Model #TB36-JAV
HARDWARE INCLUDED
AA - Shelf Clip BB - Shelf
x 8
AA
BB
Please contact 1-888-774-8062 for further assistance.
x 2
HOMEDEPOT.COM