Filter Changing and Cleaning
Upper dust bin
Bac à poussière
s
upérieure
Cubo de basura
superior
Lower dust bin
Bac à poussière
Inférieur
Cubo de basura
inferior
Locking Tabs
Languettes de
fixation
L
engüetas de
fijación
➢ ➢ Check primary filter frequently and
clean when dirty.
➢ ➢ To remove primary filter, open upper
dust bin lid assembly. Turn the upper
dust bin to the unlock position as
shown.
➢ ➢ While holding primary filter over a
trash container grasp filter, push
sideways and remove filter from
upper dust bin.
➢ ➢ Clean primary filter by gently tapping
over a trash container. Tap on several
sides to ensure best cleaning.
➢ ➢ Rinse with water only as needed. Do
not use any detergent or soap.
➢ ➢ Allow the filter to dry for 24 hours
before putting it back into the
vacuum cleaner.
➢ ➢ When cleaning the filter no longer
restores vacuum cleaner suction to
full power you need to replace the
filter.
TO REPLACE PRIMARY FILTER
➢ ➢ With slot side on filter facing the
dust bin, slide the filter's opening
over the cleaning cam, and then
push filter until it locks onto tabs in
dust bin.
Note: Under normal use and care, your
filter can be expected to last up to 5
years.
- 34 -