Easy Home 9113973 Manual Del Usuario página 19

Replacing the shaving foil unit
If the shaving foil unit is damaged, it must be promptly replaced. We generally
recommend that you replace the shaving foil unit after 12 months of daily use.
1. Depress both release buttons
(see fig. A and E).
2. Pull the shaver head up and off.
15
3. Push the hooks
shaver head frame
4. Pull the shaving foil unit down and out of the shaver head frame (see fig. L).
5. Dispose of the used shaving foil unit as described in the chapter "Disposal".
6. Place the new shaving foil unit in the shaver head frame so that:
a. the guide braces inside the shaver head frame
the guide grooves outside along the shaving foil unit
b. the recess in the shaving foil unit
recess inside the shaver head frame
7. Place two fingers on the back side of the integrated trimmer.
8. Push the shaving foil unit into the shaver head frame until the hooks
dibly lock into the shaver head frame.
9. Firmly mount the shaver head on the shaver until the locking mechanism
audibly locks into place (see fig. F).
10. Place the protective cap
Your shaver is now ready for use again.
Replacing the shaver blades e shaver b e shaver
We recommend replacing the shaver blades after 12 months of daily use. The nd replacing nd replacing
two shaver blades must always be replaced at the same time. blades mu lades m
1. Depress both release buttons h re re
2. Pull the shaver head up and off of the shaver.
3. Pull the shaver blades
4. Dispose of the used shaver blades as described in the chapter "Disposal".
5. Mount the new shaver blades on the brackets.
6. Firmly mount the shaver head
audibly locks into place (see fig. F).
7. Place the protective cap
Your shaver is now ready for use again.
AFTER SALES SUPPORT
USA
+1 877 386 8264
4
to release the shaver head
on the left and right of the shaving foil unit
17
(see Fig. K and L)
16
17
the integrated tri e integrated
e shaver head fram haver head fr
d frame. ame.
ead on the sh ead on the shaver
(see (see fig. F fig. F). )
1 1
p p onto t onto the onto the shaver (see fig. A).
dy fo dy use use agai
4
to release the shaver head
3
straight up and out of their brackets (see fig. I).
2
on the shaver until the locking mechanism
1
onto the shaver (see fig. A).
Cleaning and maintenance g
me so
17
e exten exten extend into
16 16
foil unit oil unit an and and
is on the same side as the on the same side the same
(see (see fig. K and L). e fig. K fig. K K and an L
TM3Service@outlook.com
USA
2
16
into the
15
au-
2
(see fig. E).
19