NORPOLE NPCIM350M Manual Del Usuario página 15

DISPLAY ERROR CODES
If the display shows any of these codes, check the unit before calling for customer service.
CODE CAUSE
E01 Water Curtain or Ice Full Switch Fault
E03 Ice Harvest Overtime
E04 High Temperature Fault
E05 Water Shortage Fault
E06 Over-Pressure Fault
E07 Condenser Temperature Sensor Open
Circuit Fault
E08 Condenser Temperature Sensor Short
Circuit Fault
E09 Water Temperature Sensor Open Circuit
Fault
E10 Water Temperature Sensor Short Circuit
Fault
E13 Water Level Control Fault
MODE
Sleep mode. Unit will recover
after water curtain is reset.
Sleep Mode
Sleep Mode
Sleep Mode. Unit will retry every
30 minutes.
Sleep Mode
Keep Working
Keep Working
Keep Working
Keep Working
Sleep Mode
15