Print Key & Feed Function; Numbering Function - Brother Martha Stewart PT-1760 Guía De Usuario

After you have entered your text and chosen the desired format settings, you are ready to
print.
To print a label:
Press a once. The message "PRINTING" is displayed.
●
To feed the tape:
Hold down f and press g once. 1" (25 mm) of tape is fed out.
●
To cut the tape:
●
Push down on the tape cutter lever.
☞
In order to prevent damaging the tape, do not try to cut it while printing or feed-
ing. Pushing down on the tape cutter lever too far may break it.
EXAMPLE
To make a label using the NONE tape margin setting:
Press a once.
1
Hold down f and press g once.
2
3
Push down on the tape cutter lever.
This function can be used to print many copies of the same text while increasing a certain
number in the text by 1 after each label is printed.
To use the Numbering function:
Press < or > to position the cursor below the number that you wish to increase.
1
Hold down f and press A. The message "NUMBER:1–9?" appears in the display.
2
Press the number key ( 1 to 9 ) of the last number that is to be printed.
3
☞
To cancel the Numbering, hold down f and press A (or press just c ).
Press a (or h) to begin printing the labels.
4
PRINT KEY & FEED FUNCTION

NUMBERING FUNCTION

PRINTING
25