Cleaning; Cleaning The Print Head, Rollers And Tape Cutter - Brother P-touch EDGE 7500 Guía De Usuario

Cleaning

Occasionally, certain parts of the P-touch labeler may need to be cleaned. Dust or dirt
may become attached to the P-touch labeler's print head and rollers, particularly when
the unit is used outdoors or in a very dusty environment. With use, the tape cutter may
become covered with adhesive, making it difficult to cut the tape.

Cleaning the print head, rollers and tape cutter

☞ Before cleaning the print head, rollers and tape cutter, press
touch labeler, and then remove the battery and disconnect the AC adapter.
☞ When power is disconnected for more than two minutes, all text and format settings
will be cleared. Any text files stored in the memory will also be cleared.
• Do not touch the print head directly with your bare hands. The print head may be hot.
• Do not touch the cutter blade directly with your bare hands.
Print head
Dry Cotton swab
Tape cutter blades
WARNING
Tape cutter blades
o
to turn off the P-
Dry Cotton swab
Dry cotton swab
45