Hama 73090913 Manual De Instrucciones página 12

g Operating Instruction
There are installation holes on the rear of the digital picture frame to attach it to the wall using suitable screws (not
supplied).
Insert a memory card and switch on the digital picture frame. The start screen appears after a few seconds. The
preset mode of the digital picture frame displays the photos on the memory card.
Use the (
Selection of photo, video, music,
combined display (varies according
to the device specifi cation)
(varies according to the
device specifi cation)
All setup/setting functions are available using the remote control. Some basic functions can be performed using the
buttons located at the top of the digital picture frame.
Screen display duration
File description
Folder mode
Representation format
Power saving mode
Display settings
Standard settings
System information
) buttons in the function selection menu to select the required function as follows:
5, 10, 30 and 60 seconds
On
Off
On
Off
Normal/Smart/Zoom
Off
after 15 minutes
after 30 minutes
after 60 minutes
Brightness
Contrast
-
-
Selection of the memory card
detected (varies according to
the device specifi cation)
Slide show/image transfer speed
Display the photo/fi le name
Display of folder structures
Adjustment of the photo
on the display
Setting for automatic
standby function
Control of the brightness and con-
trast display (using < and >)
Restore default setting values
Information about the software
version
11