Bosch GWS 22-180 H Professional Manual Original página 27

All manuals and user guides at all-guides.com
OBJ_BUCH-777-004.book Page 28 Wednesday, July 15, 2009 2:55 PM
28 | English
Declaration of Conformity
We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
16.12.2008
Assembly
Mounting the Protective Devices
Before any work on the machine itself, pull
the mains plug.
Note: After breakage of the grinding disc during
operation or damage to the holding fixtures on
the protection guard/power tool, the machine
must promptly be sent to an after-sales service
agent for maintenance (for addresses, see sec-
tion „After-sales Service and Customer
Assistance".
Protection Guard for Grinding
Place the protection guard 5 on the spindle col-
lar. Adjust the position of the protection guard 5
to the requirements of the operation and lock
the protection guard 5 with the locking screw 6.
Adjust the protection guard 5 in such a man-
ner that sparking is prevented in the direc-
tion of the operator.
1 609 929 R46 | (15.7.09)
Protection Guard for Cutting
For cutting metal, always work with the pro-
tection guard for cutting 7.
For cutting stone, always work with the cut-
ting guide with dust extraction protection
guard 21.
The protection guard for cutting 7 is mounted in
the same manner as the protection guard for
grinding 5.
Vibration-dampening Auxiliary Handle
Operate your machine only with the auxilia-
ry handle 3.
Screw the auxiliary handle 3 on the right or left
of the machine head depending on the working
method.
The vibration-dampening auxiliary handle reduc-
es the vibrations, making operation more com-
fortable and secure.
Do not make any alterations to the auxiliary
handle.
Do not continue to use an auxiliary handle if it
is damaged.
Hand Guard
For operations with the rubber sanding
plate 17 or with the cup brush/wheel
brush/flap disc, always mount the hand
guard 15.
The hand guard 15 is fastened with the auxiliary
handle 3.
Bosch Power Tools