Weller WX 1 Manual De Uso página 37

Parameter menu
Process window
Language
Temperature version °C/°F (temperature units)
Password (lock function)
The temperature range set in the process window determines the
signal response of the floating switching output.
Note
On tools with an LED ring light (e.g. WXDP 120), the process
window defines the illumination characteristics of the LED ring light.
If the LED is continuously illuminated, this means that the preselec-
ted temperature has been reached or that the temperature is within
the predetermined process window.
A flashing LED indicates that the system is heated or that the
temperature is outside the process window.
CHN
中文
DEN Dansk
ENG English
ESP Español
FIN Suomi
Option Beschreibung
° C Celsius
° F Fahrenheit
After switching the lock function on, only the fixed temperature keys
can be operated on the soldering station. All other settings are disab-
led until the repair station is unlocked again.
Note
If you want only one temperature value to be selectable, the control
keys fixed temperature keys) must be set to the same temperature
value.
Lock the soldering station:
Set the required three-character locking code (between 001-999)
with the turn-and-click wheel.
The lock is active (the display shows a lock symbol).
Menu access
Menu access Station parameters
FRA Français
GER Deutsch
HUN Magyar
ITA Italiano
POR Português
Menu access Station parameters
Menu access Station parameters
Tool parameters
RUS Pусский
SWE Svenska
TUR Türkçe
JPN
日本語
POL Polski
35