Package Contents; Hardware Installation - D-Link DCS-3415 Guía De Instalación Rápida

Quick Installation Guide

Package Contents

If any of the items are missing, please contact your reseller.
DCS-3415
18x PoE
Network
Camera

Hardware Installation

Connect the Ethernet Cable
Connect an Ethernet cable to the network cable connector located on the
Internet Camera's back panel and attach it to the network.
Connect Using Power-Over-Ethernet
Once you connect an Ethernet cable to your PoE switch or adapter, the
Power LED on the DCS-3415 will turn green to indicate a proper
connection.
Attach the External Power Supply
Attach the external power supply to the DC power input connector
located on the Network Camera's back panel (labeled DC 12V) and
connect the other end to an AC power outlet.
Note: The LED on the network camera will turn green, when you have a
proper connection,. The light may go on and off and your computer may
show an intermittent loss of connectivity, this is normal until you have
configured your Network Camera.
DCS-3415
18x PoE Network Camera
CD-ROM with
Manual and
Setup Wizard
CAT5 Ethernet
Cable
2
Power Adapter Camera Stand