Package Contents; Camera Installation - D-Link DCS-6110 Guia De Instalacion

Quick Installation Guide

Package Contents

If any of the items are missing, please contact your reseller.
DCS-6110
Fixed Dome
Network Camera
CAT5 Ethernet
Cable

Camera Installation

a.
Find a suitable place to install the camera using the alignment paper.
Place the camera at the desired operating location and insert the screws
through the two holes located at the base of the camera. Use the screwdriver
to tighten and secure.
b.
Network Deployment
(a)General Connection
(without PoE)
(i)Connect the network
camera to a hub via
Ethernet cable.
(ii)Connect the supplied
power cable from the
camera to a power
outlet.
DCS-6110
Fixed Dome Network Camera
Dome Enclosure
Screwdriver
Ring Enclosure
Screws and I/O
Connector
(b)Connection with a PoE Hub
If using a PoE hub, connect
the IP camera to the hub via
Ethernet cable, which will
provide transmission of both
power and data over a single
cable.
1
CD-ROM with
Manual and
Setup Wizard
12V Power
Adapter