Technical Data - Beper 40.930 Manual De Instrucciones

Hair Dryer Use instructions
PRODUCT AND ACCESORIES
1. Airflow inlet grid
2. airflow intake grid
3. Airflow concentrator
4. "Cold air" button
5. Air speed selector
6. Temperature selector
7. Handle
8. Hook
9. Cord supply
USE
With the air speed selector (5), you can set the power of the airflow as needed.
Settings.
0: turned off
1: medium airflow, for a delicate drying of the fine and slightly wet hair.
2: stronger airflow, for a faster drying
With temperature selector (6) it is possible to set the airflow temperature.
1: low temperature
2: medium temperature
3: high temperature
Cold air button
Allow to fix the hairstyle without desiccating hair. Pressing this button, the cold airflow button will stop.
CONCENTRATOR
With the concentrator, the airflow works on accurate areas, to get easily the desired hairstyle.
This accessories allow to concentrate directly the airflow on the locks, for an easy hairstyle. Put the concentrator
on the hair.
Cleaning the airflow grid
Remove the grid anticlockwise, if necessary, clean the airflow grid with a wet cloth.
Hook When complete, you can hang the hairdryer with the hook.
CLEANING
The appliance can be cleaned with a soft cloth lightly wet with hot water. Before cleaning the appliance, unplug it
from the socket. Do not clean with thinners, detergents or similar, that could damage the appliance.
Do not introduce liquids into the hair dryer in order to not damage the appliance.
Il is recommended to clean regularly the filter from hair and dust.

TECHNICAL DATA

Power: 1800-2000W
Power supply: 220-240V ~ 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
7