Superior LIA Instrucciones Para El Instalador página 9

INSTALLATION WITH REAR OUTLET
- Use a set of pliers to remove the knockout (B) on the rear panel of the
stove. (Fig. 8)
Fig. 8
G
C
INSTALLATION WITH SIDE OUTLET.
- Remove the knockout on the side panel (C). (Fig. 8)
Proceed as follows:
- Use a set of pliers to remove the two air humidifier supports (G). (Fig.
8)
The two supports (G) are disposable.
a
- Fix the top closure (2) with the 4 x M5 screws supplied. Face the piece
arrows as shown opposite. (Fig. 9)
Fig. 9
2
REAR OUTLET (D).
- Fix the fan (1) with the 3 x M5 screws supplied. (Fig. 11)
- Connect the fan outlet with the Ø 75 mm flexible pipe that is not
included with the supply.
RIGHT SIDE OUTLET (E).
- Fix the fan (1) with the 3 x M5 screws supplied. (Fig. 10)
- Connect the fan outlet with the Ø 75 mm flexible pipe that is not
included with the supply.
Fig. 10
1
1
- Use a set of pliers to bend the side tab on the guard (3) as indicated
opposite. (Fig. 11)
Fig. 11
B
DT2034063-00
a For installation with right side outlet (E), use a set of pliers
to remove the knockout (F) on the right side of the guard (3).
- Thread the cable (4) through the guard (3) hole and connect its
terminals to the fan (1) as shown in the stove wiring diagram. (Fig. 12)
Fig. 12
- Fix the guard (3) with the M5 screws supplied. (Fig. 13)
DT2034064-00
Fig. 13
D
E
DT2034065-00
H07031720 / DT2002253 – 01
3
3
1
3
DT2034066-00
4
DT2034067-00
DT2034068-00
9