Ubbink 400X750-H130 cm Prospecto De Montaje página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41
WARRANTIES - After-sales service
Swimming pool 400x750 - H130 cm
Warranty conditions:
The swimming pool must be assembled within 48 hours of the package being opened.
For the warranty to be valid, a concrete slab must be in place.
Our warranty covers only the replacement of defective parts. It in no way covers demands for compensation or damages. The general warranty does not apply in the following circumstances:
• Use of the equipment in a way which is not in accordance with the instructions.
• Damage incurred as a result of bad handling during and after assembly.
1) Pump : 2 year warranty (electrical problems) under normal usage conditions. The following are not covered by the warranty: Deterioration by abrasion or corrosion, deterioration due to a faulty connection,
equipment dismantled or repaired by a third party, parts breaking (pump base, prefilter cover, hose connector...), running the pump when dry. The warranty is void if the electrical cable and/or the plug are
replaced, removed or damaged
2) Liner : 2 year warranty under normal usage conditions. The following are not covered by the warranty: Punctures, holes, tears, stains (treatment products directly in the water), stains due to algae growth, stains
due to decomposition of foreign bodies in contact with the liner, stains and decolouration due to oxidising products, colourfastness and wear due to rubbing on various surfaces. Deformation of the liner left without
water for more than 24 hours (never empty your swimming pool completely).
3) Filter : 2 year warranty on non-installed products: tank, drainage plug, collar, multiport valves... The following are not covered by the warranty: Watertightness problems following use of pressure greater than the
maximum authorised pressure. (ref. filter notice).
4) Skimmer : 2 year warranty on the seal joints.
5) Wooden structure : 10 year warranty against corrosion and insect attack. The following are not covered by the warranty: Changes in wood colour due to weather, natural deformations (splitting, cracks which
in no way impair the mechanical performance of the wood). The warranty does not cover assembly or storage faults producing deformations in the wall panels (if assembled a long time after the package being
opened), deformation of the planks which in no way impairs the mechanical performance of the swimming pool.
IMPORTANT : The after-sales service will be available only at point of sale.
Essential records for claiming the warranty: - Till receipt/proof of purchase.
- Warranty slip.
- Reference number of the faulty part.
Shop :
City :
Contact department :
Direct tel :
Code
Code
Ref.
Ref.
Désignation
Désignation
M-1
7514095
Plank 45 x 145 x 1780 mm
M-1
7514095
Plank 45 x 145 x 1780 mm
M-2
M-2
7514848
7514035
Plank 45 x 145 x 5290 mm
Plank 45 x 145 x 4480 mm
MS-C
7514036
Upper plank 45 x 135 x 1780 mm
MS-C
7514036
Upper plank 45 x 135 x 1780 mm
MS-L
MS-L
7514849
7514038
Upper plank 45 x 135 x 5290 mm
Upper plank 45 x 135 x 4480 mm
2MS
7514039
Upper 1/2 plank 45 x 67 x 1780 mm
2MS
7514039
Upper 1/2 plank 45 x 67 x 1780 mm
2MI-C
2MI-C
7514041
7514041
Lower 1/2 plank 45 x 77 x 1780 mm
Lower 1/2 plank 45 x 77 x 1780 mm
2MI-L
7514044
Lower 1/2 plank 45 x 77 x 4480 mm
2MI-L
7514850
Lower 1/2 plank 45 x 77 x 5290 mm
MSS
MSS
7514045
7514045
Upper skimmer plank 45 x 135 x 1780 mm
Upper skimmer plank 45 x 135 x 1780 mm
MIS
MIS
7514069
7514069
Lower skimmer plank 45 x 145 x 1780 mm
Lower skimmer plank 45 x 145 x 1780 mm
MR
MR
7514077
7514077
Water jet plank 45 x 145 x 1780 mm
Water jet plank 45 x 145 x 1780 mm
PR
PR
7514097
7514097
Post 45 x 135 x 1275 mm (reinforcement)
Post 45 x 135 x 1275 mm (reinforcement)
7514114
Sacrifice part 45 x 135 x 280 mm
7514114
Sacrifice part 45 x 135 x 280 mm
PF
PF
7514113
7514113
L-section finish 28 x 70 x 1260 mm
L-section finish 28 x 70 x 1260 mm
C
7514048
Console edging 45 x 230 x 170 mm
C
7514048
Console edging 45 x 230 x 170 mm
7514049
7514049
Wooden stop block for the skimmer flap 30 x 20 x 170 mm
Wooden stop block for the skimmer flap 30 x 20 x 170 mm
L
7514096
Dressing lath 22 x 165 x 1275 mm
L
7514096
Dressing lath 22 x 165 x 1275 mm
PL
PL
7100201
7100201
Pair of rungs for wooden ladder H120/130 cm
Pair of rungs for wooden ladder H120/130 cm
T
7514052
Pine skimmer edging 28 x 145 x 600 mm (flap)
T
7514052
Pine skimmer edging 28 x 145 x 600 mm (flap)
MSD
MSD
7514054
7514054
Pine outer right skimmer edging 28 x 145 x 526 mm
Pine outer right skimmer edging 28 x 145 x 526 mm
MSG
7514055
Pine outer left skimmer edging 28 x 145 x 526 mm
MSG
7514055
Pine outer left skimmer edging 28 x 145 x 526 mm
MGI-M 7100210
MGI-M 7100210
Pine edging 28 x 145 x 1529 mm Int.
Pine edging 28 x 145 x 1529 mm Int.
MGE-M 7100215
Pine edging 28 x 145 x 1653 mm Ext.
MGE-M 7100215
Pine edging 28 x 145 x 1653 mm Ext.
MGI-L
MGI-L
7514851
7100230
Pine edging 28 x 145 x 5039 mm Int.
Pine edging 28 x 145 x 4229 mm Int.
MGE-L 7100235
Pine edging 28 x 145 x 4353 mm Ext.
MGE-L 7514852
Pine edging 28 x 145 x 5163 mm Ext.
BM-H
7514149
7514011
Sandbag (25kg)
IPE 120 galvanised cradle - 3590 mm
BM-V
7514012
Complementary IPE 120 galvanised cradle - 1294 mm
R
7514016
Hung 2.06 ml hanging rails
7514750
7514214
3-step stainless steel ladder
Bag of 12 metal cradle bolts
7514149
Sandbag (25kg)
BM-H
7514011
IPE 120 galvanised cradle - 3590 mm
BM-V
R
7514012
7514016
Complementary IPE 120 galvanised cradle - 1294 mm
Hung 2.06 ml hanging rails
7514750
3-step stainless steel ladder
7514214
Bag of 12 metal cradle bolts
Poolmax pump
Filtration
Ground protection felt
Flexible pipe, 8 m
S
Skimmer
JM
Anodised aluminium joint
Protective felt for wall
Client :
Address :
City :
Tel :
Qty
Qty
Qty
Qty
7514756
parcel
parcel
ASS
ASS
50
50
Code
Ref.
BREAKDOWN OF THE HARDWARE KIT
16
16
A1
7514516
Console + reinforcer bag
1
1
B
7514270
Cradle cache bag
2
2
C1
7514372
Hung rails bag
4
4
DMI
7514553
Edging screw bag
2
2
DMP3
7514619
Edging screw bag
2
2
E
7514145
Skimmer flap bag
1
1
G
7514146
Wooden ladder + finishing profile bag
1
1
F
7514620
Aluminium edging joint bag
1
1
22
14
1
2
16
16
24
28
2
2
4
6
1
1
MGI-M
5
5
MGE-M
1
1
1
1
6
6
5
5
2
2
2
2
3
2
4
10
1
2
3
3
10
6
1
3
MGI-M
1
1
M-1
3
2
1
8
2
Hardware kit
1
Qté
Qté
parcel
ASS
4
3
2
1
1
1
1
1
BM-H
MSS
MIS
2MI-L
PR
MS-L
PR
8
II / 16-1
7513003
Blue 75/100 liner 400 x 750 - H130 cm
or
7513004
Beige 75/100 liner 400 x 750 - H130 cm
PL
T
MGE-L MGI-L
2MI-C
BM-H
BM-V
BM-H
BM-V
M-2
1
1
MS-C
BM-V
PR

Publicidad

Tabla de contenido
loading

Tabla de contenido