Mixcder E7 Manual De Usuario página 5

3.Press and hold the power button on the headphone until
it powers on but don't let go just yet. Continue holding down
on the power button until you see the LED indicator flashes
blue and red alternately, which means your headphone is in
"pairing mode"waiting to be paired with your device. You
will hear a prompt.
4.Turn on wireless capability on your phone and search for
new devices.
5.Select the "Mixcder E7" to pair. Once successfully paired,
the LED turns to solid blue. You will hear a prompt.
5-3 Connecting to Paired Devices
Mixcder E7 will pair with the last paired device automati-
cally when turning on. Because of different systems, some
computers or laptops may need to be manually paired
every time.
6.Active Noise Canceling
Mixcder E7 contains a noise cancelling circuit, noise mainly in
an airplane, buses or trains is effectively reduced.
1).The noise cancelling effect may not be pronounced in a
very quiet environment, or some noise may be heard.
2).The noise cancelling effect may vary depending on how
you wear the headphone.
3).The noise cancelling function works for noise in the low
frequency band primarily. Although noise is reduced, it is not
canceled out completely.
4).When you use the headphones in a train or a car, noise
may occur depending on street conditions.
EN-4