Manual Climate Control - Metra 99-7524B Instrucciones De Instalación

Manual climate control:

1. Put the climate control knob
outer trim panel and the backlight
dispersion bar together and clip
into the radio housing panel as
one radio.
Note: You may have to push down
slightly on the middle of the radio
to ease in positioning it into the kit.
(Figures A, B, C)
(Figure A)
Kit Assembly
ASSEMBLED
(Figure B)
INSTALLED
(Figure C)
99-7524B
2. Secure the radio with the factory
hardware previously removed from
the manual climate control
dash disassembly.
3. Secure the light bulb boards
on each side of the backlight
dispersion bar using the factory
hardware removed in step 8 in
manual climate control dash
disassembly. (Figure D)
4. Unclip and remove the small oval
cover plate at the bottom center of
the factory radio and insert into the
99-7524B radio housing.
(Figure E)
6
(Figure D)
(Figure E)