Optional Installation - Tripp-Lite SmartPro 2U Manual Del Propietário

Optional Installation

These connections are optional. Your UPS will function properly without these connections.
USB and RS-232 Serial
1
Communications
Use the included USB cable (see
DB9 serial cable (see
communication port on your computer to
the communication port of your UPS. Install
on your computer the Tripp Lite PowerAlert
Software appropriate to your computer's
operating system.
EPO Port Connection
2
This optional feature is only for those
applications which require connection to a
facility's Emergency Power Off (EPO) circuit.
When the UPS is connected to this circuit, it
enables emergency shutdown of the UPS's
inverter.
Using the cable provided, connect the EPO
port of your UPS (see
normally closed or normally open switch
according to the circuit diagram (see
The EPO port is not a phone line surge
suppressor; do not connect a phone line to
this port.
14-03-028-93-3088.indb 7
) or
1A
) to connect the
1B
) to a user-supplied
2A
).
2B
7
1A
1B
2A
2B
4-5
3/20/2014 4:08:41 PM