Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2.11
2.11 HDMR Card and Driver Installation
2.11
HDMR Card and Driver Installation
HDMR Card and Driver Installation
HDMR Card and Driver Installation
2.11
2.11
HDMR Card and Driver Installation
If you do not insert HDMR card to this motherboard, and you finish installing all
drivers to your system now, but in the future, you plan to use HDMR card function
on this motherboard, please follow the steps below then.
1. Insert HDMR card to HDMR slot on this motherboard. Please make sure that the
HDMR card is completely seated on the slot.
2. Install HDMR card driver from our support CD to your system.
3. Reboot your system.
2.12
2.12 Installing Windows
2.12
Installing Windows
Installing Windows
Installing Windows
2.12
2.12
Installing Windows
XP 64-bit / Windows
XP 64-bit / Windows
XP 64-bit / Windows
XP 64-bit / Windows
XP 64-bit / Windows
The installation procedures for Windows Vista
If you just want to install Windows
your SATA / SATAII HDDs without RAID functions, you don't have to make a SATA /
SATAII driver diskette. Besides, there is no need for you to change the BIOS setting.
You can start to install Windows
your system directly.
2.13
2.13
Installing Windows
Installing Windows
2.13
2.13
2.13 Installing Windows
Installing Windows
Installing Windows
XP 64-bit / Windows
XP 64-bit / Windows
XP 64-bit / Windows
XP 64-bit / Windows
XP 64-bit / Windows
The installation procedures for Windows Vista
If you want to install Windows
SATA / SATAII HDDs with RAID functions, please follow the below steps.
Before installing Windows
include SP4. If there is no SP4 included in your disk, please visit the below
website for proper procedures of making a SP4 disk:
http://www.microsoft.com/Windows2000/downloads/servicepacks/sp4/
spdeploy.htm#the_integrated_installation_fmay
STEP 1: Make a SATA / SATAII Driver Diskette.
A.
Insert the ASRock Support CD into your optical drive to boot your system.
B.
During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-
ROM as the boot device.
C.
When you see the message on the screen, "Generate Serial ATA driver
diskette [YN]?", press <Y>.
D.
Then you will see these messages,
Please insert a blank
formatted diskette into floppy
drive A:
ASRock 939NF4G-VSTA Motherboard
2000 / Windows
2000 / Windows
2000 / Windows
2000 / Windows
2000 / Windows
®
Vista
Vista
Without RAID Functions
Without RAID Functions
Vista
Vista
Vista
Without RAID Functions
Without RAID Functions
Without RAID Functions
TM
TM
TM
TM
TM
®
TM
®
®
2000, Windows
XP or Windows
®
2000, Windows
®
XP or Windows
2000 / Windows
2000 / Windows
2000 / Windows
2000 / Windows
2000 / Windows
®
Vista
Vista
Vista
With RAID Functions
With RAID Functions
With RAID Functions
Vista
Vista
TM
TM
With RAID Functions
With RAID Functions
TM
TM
TM
®
TM
®
®
2000, Windows
XP or Windows
®
2000 to your system, your disk is supposed to
XP / Windows
XP / Windows
XP / Windows
XP / Windows
XP / Windows
®
®
are subject to change.
®
XP 64-bit on
®
XP 64-bit on
XP / Windows
XP / Windows
XP / Windows
XP / Windows
XP / Windows
®
®
are subject to change.
®
XP 64-bit on your
1 9
1 9
1 9
1 9
1 9
Publicidad
Tabla de contenido
