Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Pontiac GTO 2004-2006
KIT FEATURES
• DIN radio provision with pocket
KIT COMPONENTS
• A) Radio Housing
A
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1784
Antenna Adapter: • 40-VW10
TOOLS REQUIRED
• 86-3528 Radio Removal Keys • Panel Removal Tool • Phillips Screwdriver
METRA. The World's best kits.
Installation instructions for part 99-3528
99-3528
metraonline.com
™
Table of Contents
Dash Disassembly ................................................. 2
Kit Assembly
– DIN radio provision with pocket ............................ 3
CAUTION!
Metra recommends disconnecting the negative bat -
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con -
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
Publicidad
Manuales relacionados para Metra 99-3528
Resumen de contenidos para Metra 99-3528
- Página 1 • DIN radio provision with pocket KIT COMPONENTS • A) Radio Housing CAUTION! Metra recommends disconnecting the negative bat - tery terminal before beginning any installation, unless the vehicle manufacturer recommends against so. Please check with your local WIRING & ANTENNA CONNECTIONS (sold separately) Dealership for more information.
- Página 2 99-3528 Dash Disassembly 1. Using the radio removal keys, pull 5. Remove (2) Phillips screws the factory radio from the dash and exposed at the bottom of the disconnect the wiring. (Figure A) center panel surrounding radio and remove panel. (Figure E) 2.
- Página 3 5. Locate the factory wiring harness and antenna plug in the dash and make all necessary connections to the radio. Metra recommends using the proper mating adapters from Metra and/or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation.
- Página 4 Installation instructions for part 99-3528 IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
- Página 5 Sería mejor retirar la llave de la ignición y esperar unos HERRAMIENTAS REQUERIDAS cuantos segundos antes de quitar el radio de fábrica. • Llaves de remoción de radio 86-3528 • Herramienta para quitar paneles • Destornillador Phillips METRA. The World’s best kits. metraonline.com ™ © COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION...
- Página 6 99-3528 Desmontaje Dash 5. Quite los (2) tornillos Phillips Usando las llaves de remoción de radio, jale el radio de fábrica del tablero y expuestos en la parte inferior del desconecte el cableado. (Figura A) panel central que rodea el radio y quite el panel.
- Página 7 Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. Vuelva a conectar la terminal negativa de la batería y pruebe el radio para verificar que funcione correctamente .
- Página 8 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). METRA. The World’s best kits. metraonline.com ™ © COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION...