Metra 99-3528 Instrucciones De Instalación página 3

DIN radio provision with pocket
1. Remove the metal DIN sleeve from
the aftermarket radio.
2. Slide the sleeve into the Radio
Housing and secure by bending the
metal locking tabs down. (Figure A)
3. Slide the radio back into the sleeve
until it clicks in. (Figure B)
4. Reassemble the dash in reverse
order of disassembly, leaving the
cage removed in disassembly out.
5. Locate the factory wiring harness
and antenna plug in the dash and
make all necessary connections
to the radio. Metra recommends
using the proper mating adapters
from Metra and/or AXXESS.
Re-connect the negative battery
terminal and test the radio for
proper operation.
6. Snap the completed assembly into
the dash until secure.
Kit Assembly
(Figure A)
(Figure B)
99-3528
3