Metra 99-3045 Instrucciones De Instalación

Metra 99-3045 Instrucciones De Instalación

Gm small truck 1994-1997

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

GM Small Truck 1994-1997
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8" Phillips screws
A
B
CHEVROLET
GMC
Blazer
1995-1997
Jimmy
S-10 pickup 1994-1997
Sonoma
METRA. The World's best kits.
Installation instructions for part 99-3045
99-3045
C
D
APPLICATIONS
Isuzu
1995-1997
Hombre
1996-1997
1994-1997
metraonline.com
Dash Disassembly ..................................................2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
– ISO DDIN radio provision ...................................... 3
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • Socket wrench
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1858
Antenna Adapter: • 40-GM10
CAUTION!
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con -
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
Oldsmobile
vehicle running. It would be best to remove the key from the ignition
Bravada
1995-1997
and then wait a few seconds before removing the factory radio.
Table of Contents
Metra recommends disconnecting the negative bat -
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Metra 99-3045

  • Página 1 Wiring Harness: • 70-1858 Antenna Adapter: • 40-GM10 CAUTION! Metra recommends disconnecting the negative bat - tery terminal before beginning any installation, unless the vehicle manufacturer recommends against so. Please check with your local Dealership for more information. All accessories, switches, climate...
  • Página 2: Dash Disassembly

    99-3045 Dash Disassembly 1. Remove (2) screws above the speedometer cluster. 2. Remove the ashtray, and then (1) screw exposed in the ashtray cavity. 3. Remove (2) screws from the lower steering column panel, and then loosen the panel at the top.
  • Página 3: Kit Assembly

    (Figure A) 3. Slide the radio into the pocket/ connections to the radio. Metra bracket assembly, and then secure recommends using the proper with the screws included with mating adapter from Metra or radio.
  • Página 4: Important

    Installation instructions for part 99-3045 IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
  • Página 5: Herramientas Requeridas

    Instrucciones de instalación para la pieza 99-3045 Indice GM Camión Pequeño 1994-1997 99-3045 Desmontaje tablero ..........2 Ensamble del kit – Provisión de radio ISO DIN con cavidad ....3 – Provisión de radio ISO DDIN ......... 3 CARACTERÍSTICAS DEL KIT •...
  • Página 6: Desmontaje Tablero

    99-3045 Desmontaje tablero 1. Retire (2) tornillos por encima del racimo del velocímetro. 2. Quite el cenicero, y luego (1) tornillos expuestos en la cavidad del cenicero. 3. Quite (2) tornillos del panel inferior de la columna de dirección, y luego afloje el panel en la parte superior.
  • Página 7: Ensamble Del Kit

    Metra recomienda 3. Deslice la radio en el conjunto de que use adaptadores adecuados de bolsillo/soporte, y sujételo con acoplamiento de Metra y/o de AXXESS. los tornillos suministrados con el Vuelva a conectar la terminal negativa (Figura A) radio.
  • Página 8: Importante

    Instrucciones de instalación para la pieza 99-3045 IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...

Tabla de contenido