Assembly Instructions - Allen + Roth FHTS80007B Manual Del Usuario

ASSEMBLY INSTRUCTIONS

1. Carefully place the top (1) upside down on a soft surface. Failure to do so
could result in damage or scratches to the tabletop. Attach the side panel A(2),
and side panel B(3) to the top (1). Use bolts (AA).
Hardware Used
2. Attach the side panel C(4) to the side panel A(2) and side panel B(3).
Use bolts (AA) to fasten the connectors(7).
Hardware Used
3 Attach the tank base (6) to the side panel A(2) and side panel B(3).
.
Use bolts (BB) and screw caps (CC).
Hardware Used
4 Attach the side panel D(5) to the side panel A(2)
.
x 4
x 8
x 4
x 4
8
1
2
3
4
ATTENTION: Assembly is
easiest when you partially
tighten bolts at first. Only
tighten by hand.
ATTENTION: Assembly is
easiest when you partially
tighten bolts at first. Only
tighten by hand.