Mobile Battery-Operated LED Chip Light
D
ML CA 110 IP54
SAfEty INfOrMAtION
• R ead the operating instructions carefully before using the light and store them for future use.
• C heck the light and the power adapter for damage prior to each use.
Do not use the light or the power adapter if they are damaged.
In that case, contact a qualified electrician or the manufacturer's service department at the
address provided.
Non-compliance can result in danger to life from electric shock!
• D o not open the device. The light does not contain any components that need servicing.
The LEDs are not replaceable.
• D o not use the work light in potentially explosive environments where flammable liquids,
gases or dusts are present. Danger to life!
• K eep children away from the work light.
Children are unaware of the risks posed by electrical current.
• A lways use the power adapter provided with the light to charge the batteries.
The use of other power adapters may result in damage to the batteries or in an explosion!
• D isconnect the power adapter from the mains and switch off the light before cleaning it.
Clean the light regularly with a dry, lint-free rag.
A slightly damp rag may be used to remove more stubborn dirt.
Do not use solvents, corrosive cleaners or the like.
• D o not look directly at the light to avoid being blinded.
SwItCHING tHE LIGHt ON/Off:
To switch the light on set the switch to the "I" (ON) position.
To switch it off, set the switch to the middle position, "O" (OFF).
BA_ML_CA_110_IP54_170308.indd 5
³
5
08.03.17 17:14