Hitachi CP-X8150 Manual De Usuario página 242

Connection to the ports
Connection to the ports
NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the
input ports of the projector are recessed.
►Only the signal that is input from the COMPUTER IN1 or IN2 can be output
from the MONITOR OUT port.
COMPUTER IN1,
A
D-sub 15pin mini shrink jack
<Computer signal>
• Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive)
• H/V. sync. signal: TTL level (positive/negative)
• Composite sync. signal: TTL level
<Component video signal>
• Video signal: Y with composite sync, Analog, 1.0±0.1Vp-p, 75Ω terminated
Cb/Pb, Analog, 0.7±0.1Vp-p, 75Ω terminated
Cr/Pr, Analog, 0.7±0.1Vp-p 75Ω terminated
• System: 480i@60, 480p@60, 576i@50, 720p@50/60, 1080i@50/60
Pin
Video Red, Cr/Pr
1
Video Green, Y
2
Video Blue, Cb/Pb
3
(No connection)
4
5 Ground
Ground Red, Ground Cr/Pr
6
Ground Green, Ground Y
7
Ground Blue, Ground Cb/Pb
8
4
MONITOR OUT
B
Signal
Pin
(No connection)
9
10 Ground
(No connection)
11
A : SDA (DDC data) B : (No connection)
12
13 H. sync / Composite sync.
14 V. sync.
A : SCL (DDC clock) B : (No connection)
15
A
B
⑪ ⑫ ⑬ ⑭ ⑮
⑥ ⑦ ⑧ ⑨ ⑩
① ② ③ ④ ⑤
Signal