Precautions - Kenwood TK-D740H Guia Del Usuario

TM
The AMBE+2 voice coding Technology embodied in this product is protected by intellectual
property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc.
This voice coding Technology is licensed solely for use within this Communications Equipment.
The user of this Technology is explicitly prohibited from attempting to extract, remove, decompile,
reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into
a human-readable form. U.S. Patent Nos. #6,199,037, #6,912,495, #8,200,497, #7,970,606, and
#8,359,197
Firmware Copyrights
The title to and ownership of copyrights for firmware embedded in KENWOOD product memories
are reserved for JVC KENWOOD Corporation.
Observe the following precautions to prevent fi re, personal injury, and transceiver
damage.
• Do not attempt to confi gure the transceiver while driving; it is too dangerous.
• Do not disassemble or modify the transceiver for any reason.
• Do not expose the transceiver to long periods of direct sunlight, nor place it
near heating appliances.
• If an abnormal odor or smoke is detected coming from the transceiver, switch
the transceiver power off immediately, and contact your KENWOOD dealer.
• Use of the transceiver while you are driving may be against traffi c laws. Please
check and observe the vehicle regulations in your area.
• Do not use options not specifi ed by KENWOOD.
• Do not put the plastic bag used for packing of this equipment on the place
which reaches a small child's hand. It will become a cause of suffocation if it
wears fl atly.
• Do not place the transceiver on unstable surfaces.
• Keep the volume as low as possible to protect your hearing.
• Always switch the transceiver power off before installing optional accessories.
CAUTION
◆ The transceiver operates in 12 V negative ground systems only! Check the battery
polarity and voltage of the vehicle before installing the transceiver.
◆ Use only the supplied DC power cable or a KENWOOD optional DC power cable.
◆ Do not cut and/or remove the fuse holder on the DC power cable.
◆ Do not place the microphone cable around your neck while near machinery that may
catch the cable.
WARNING
For passenger safety, install the transceiver securely using the supplied mounting
bracket and screw set so the transceiver will not break loose in the event of a collision.
4

PRECAUTIONS