Make a paper mounting template before installation to map a suitable distance
from the edge of the cabinet and centre the rear bracket. After determining the
appropriate position the bracket, drill two holes (Φ 3mm) for the bracket. Fasten the
rear bracket to the cabinet.
Finally, position the oven as desired (the masking frame should be at the centre of
the cabinet and be in contact with its edge).
After determining the position, attach the microwave oven to the kitchen cabinet
with a fixing screw (at the bottom of the masking frame - see Figure). After tighten-
ing the fixing screw in the cabinet, place a decorative cap in the hole at the bottom
of the masking frame.
73