Turbo Brush - domoova DHV50 Manual De Instrucciones

EN
Maintenance

Turbo brush

Electric rotating brush
Please make sure to clean the brush regularly for optimum
performance.
Figure 1
Release the latch under the turbo brush (Figure 2) then remove the
brush (Figure 2).
Remove debris (hair, dust) buildup on the brush and reattach the
brush. Make sure you reposition the release latch correctly.
Castor
Check that the castor under the Turbo brush is clean. Dust particles
can accumulate and prevent the turbo brush from functioning
correctly.
NOTE:
• To reattach the brush, first insert the left side into the notches and then the
right side.
• To remove the turbo brush castor, take a small slotted screwdriver and gently
dislodge the castor's fixing rod. Remove any debris and reattach the castor.
Figure 2
14