Control Panel; Feed Button - Epson TM-S9000MJ Manual Del Usuario

Control Panel

(Power) LED
Comes on when the product is on.
Flashes while some operations such as turning power on/off, ink charging, or cleaning, are
executed.
Note:
Be sure not to turn off the product or open the covers while
Error LED
Comes on when the product is offline (except during roll paper feeding using the Feed
button, during self-test, and cleaning).
Flashes when an error occurs. (See "Troubleshooting" on page 21.)
Document LED
Comes on when the product is ready to process cut sheet paper in the ASF or while the
product is processing cut sheet paper.
Flashes when the product is waiting for cut sheet paper insertion.
ID Card LED
Comes on when ID card is set and the product is ready to process it.
Flashes when the product is waiting for ID card insertion or removal.
Ink LED
Comes on when no ink cartridge is installed or it is time to replace the ink cartridge.
Flashes when ink is low.
Cleaning button
Pressing this button for three seconds or more starts the print head cleaning. (See
"Cleaning the Print Head" on page 19.)
Paper LED
Comes on when the roll paper is out or almost out.
Flashes when the product is waiting for test printing on the roll paper.

Feed button

Pressing this button feeds the roll paper.
(Power) LED
Error LED
Document LED
ID Card LED
Ink LED
Cleaning button
Paper LED
Feed button
LED is fl
(Power)
TM-S9000MJ User's Manual 13
English
ashing.